ETRS. 5X Advanced Broniew technologies for new imaging horizons! UUUUU. RIBES. LETTO m. El triu. BINIA BRONICA. ETRO. SORER. ZENZA BRONICA. the Zenza Bronica ETRS and is between the lens leaf shutter type single lens reflex Although the following instructions are based on the standard ETRSi. Congratulations on your choice of the Zenza Bronica ETRS (or ETRC) this instruction manual carefully, before you even touch the camera. However, if your .
|Published (Last):||16 March 2013|
|PDF File Size:||20.95 Mb|
|ePub File Size:||10.46 Mb|
|Price:||Free* [*Free Regsitration Required]|
To close the focusing hood, first, push down the magnifier if it is flipped up.
Zenza Bronica ETRS User Manual
Lens diaphragm Fully automatic instant reopening lens diaphragm action; equal-distant aperture scale graduations; depth of field previewing. When in focus, however, the two mahual will coincide with the diagonal displacement disappearing.
Simply load up a new film back, with the required film, and go out shooting. Fully automatic Minimum Focus: For photography with the mirror locked up, beonica cock the shutter with the film winding crank Wipe the camera carefully with a well-wrung damp cloth, using fresh water, if the exterior is affected by salty air. Interchanging Focusing Screens A. All available frames 15 frames on the roll film and 30 frames on the roll film have been exposed.
Don’t touch the surface as you may leave fingerprints. When the shutter is charged or cocked, both cocking pins of lens and manuall are set to the green colored dot. To return the magnifier to its storage position, simply push it down until it catches. If the film winding crank is rotated while the shutter release button is being depressed, the shutter will be released at the instant the winding action is completed.
When the starting point, or arrow-mark, is aligned with the triangular start-mark on the top left side of the film holder, stop rotation.
Clean the contacts of the battery chamber and battery with a soft cloth. Battery with leakage or corrosion should be discarded immediately and the battery chamber should be cleaned out thoroughly, especially the contact terminals, before inserting a new battery. A focusing screen with matte center plus full-area fresnel lens outside the center spot is also available. Distance scales on the Bronica lenses for the ETRS can be used for setting the focus on the required distance or finding the distance actually focused.
There were never any chrome metal finders, though most of the pre finders seem to have been black painted metal just like the standard black bodies.
Film Advance and Shutter Cocking.
Bronica ETR – – The free camera encyclopedia
The winder on the back insert has changed from a thumb style to a flip out crank style. Align “A” AE dial to index mark. Attachment and Removal of Film Backs. Artboard Artboard Artboard Artboard. Interchanging Focusing Screens Pushing the back cover opening button inwards in the arrow indicated direction opens the back cover and bronics the film holder to be detached.
When film mankal are interchanged, the shutter cannot be released if the shutter is not cocked or the film is not advanced or both.
Comments to this Manuals Your Name. New features include mirror lockup switch located near the film winding crank. All the backs have a film reminder tab holder, insert release latch and a darkslide system. The same is the case when the exposure counter is still between “S” and “1”.
The film back frame completely encloses the film holder and shields it from outside light, as well as janual it to the camera main body. Broniva film back holder EI has been improved with locking dark slide system similar to the older 6×6 Bronicas.
Use the above address for a check, M. Remove the film holder bronicca, while preventing the loose film from unwinding, take out the take-up spool. This is because the mirror does not automatically return and has to move out of the way.
Film roll film 15 exposures ; Views Read View source View history. Use a smooth and gentle action and press all the way in. The electronically-controlled shutter will not work without loading the battery. The film back consists of a film holder and a film back frame, with exclusive film holders supplied for and roll films. This redesign makes removing lenses easier, pulling on the switch and rotating the lens to release instead of rotating and pressing the lens release as well as rotating the lens.
Since introduction, the ETR series has been produced in chrome . First, cock the shutter with the film winding crank and then shift the time exposure lever to the left looking from the body towards the lenswhich will expose a red-colored “T” on the barrel. Personal tools Log in. Be sure to use and store the battery correctly for obtaining optimum performance from it at all times. For example, if the 75mm lens is focused at a distance of 1.
Bronica ETR camera manual
Film Type Indicator Frame When loading roll film in it’s exclusive film back, do not mistake the dotted line for the starting point, as it is located before the arrow marks.
The numerals on the shutter speed scale are the shutter speed settings, which are placed in the window on the top left-side of the body with the shutter speed dial. See Bronica lenses for available lenses. Push it all the way in.
First, remove the finder attached to the camera main body. Simply rotate the magnifier frame in the counter-clockwise direction to unscrew.